Skip to product information

RUiXU

RUiXU RX-LFP48100-H 5.12kWh Self-Heating LiFePO4 Server Rack Battery

RUiXU RX-LFP48100-H 5.12kWh Self-Heating LiFePO4 Server Rack Battery

SKU: RUIXU-RX-LFP48100-H

Regular price
$1,099.00
Regular price
Sale price
$1,099.00
View Cart

In stock — available to order

Need help before ordering? Call 888-495-5870 Contact our support team

5.12kWh self-heating 3U server-rack battery

Keep modular 48V storage charging when the battery room gets cold.

The RUiXU RX-LFP48100-H stores 5.12kWh at 51.2V and 100Ah in a compact 3U LiFePO4 module with integrated self-heating. It is built for expandable home-backup and off-grid banks that need supported inverter communication plus a deliberate low-temperature charging strategy.

RUiXU RX-LFP48100-H 5.12kWh self-heating server-rack battery

At a glance

The numbers that shape the system decision

5.12kWhNominal energy
51.2V / 100AhBattery platform
480WIntegrated heater
32 unitsParallel support, up to
Self-heating protects charging—it does not make the battery weatherproof

RUiXU lists an IP20 enclosure for indoor use. The heater draws from the charger and must operate within the specified temperature and charging conditions; do not expose the module to rain or outdoor moisture.

RUiXU self-heating rack batteries installed in a modular rack

Modular storage for colder spaces

Add low-temperature charging support without changing the 3U battery format.

Automatic heater logicRUiXU lists heater start at 5°C (41°F) or below and stop at 12°C (53.6°F) or above.
Expandable 48V bankScale one 5.12kWh module into a larger compatible parallel bank using the approved cabinet, rack, cable and protection architecture.
Inverter communicationCAN and RS485 support listed inverter protocols while front controls and display simplify commissioning and status checks.

System fit

Confirm heater power, inverter protocol and indoor environment.

Verify 51.2V-class inverter compatibility, communication protocol, recommended charge/discharge settings, cold-temperature operation, battery count, cable architecture and protection. RUiXU lists approximately 103.6 lb per module and dimensions near 19 × 18.1 × 5.23 in.

Cold-weather chargingRUiXU states the heater can support charging down to -20°C (-4°F) when charger power and operating conditions meet its requirements.
Indoor installationIP20 means a dry, protected, ventilated location with adequate rack support and service clearances.

In the box

What this listing includes

  • One RUiXU RX-LFP48100-H battery module
  • One RJ45/CAT5e patch cable
  • One ground cable
  • One set of parallel 4 AWG battery cables

Installation materials, protection devices and other balance-of-system components are separate unless explicitly listed above.

Product confidence

10-year RUiXU battery warranty

RUiXU lists a 10-year warranty for its branded batteries, including the RX-LFP48100-H. Coverage, exclusions and remedies are governed by RUiXU’s current written warranty and require proof of purchase.

Common questions

RUiXU RX-LFP48100-H FAQ

What is the difference from RX-LFP48100?

The H model adds integrated self-heating for supported low-temperature charging; both use the 51.2V, 100Ah, 3U platform.

Can it charge below freezing?

RUiXU states it can safely charge down to -20°C (-4°F) using heater power from a charger, provided the full installation and settings follow current instructions.

Can I mix heated and non-heated modules?

Do not assume mixed-bank compatibility. Ask RUiXU or Torven to confirm exact models, firmware, current sharing and commissioning before combining batteries.

Can I mount it outdoors?

No. RUiXU lists IP20; install it in a dry, protected indoor enclosure or battery room.

RUiXU RX-LFP48100-H 5.12kWh Self-Heating LiFePO4 Server Rack Battery RUiXU RUiXU RX-LFP48100-H 5.12kWh Self-Heating LiFePO4 Server Rack Battery

Torven Power Planner

Not sure this product fits your setup?

Build a personalized power plan before you order. We’ll estimate the capacity, output, voltage, runtime, and solar input your setup needs—then connect you with real products from our catalog.

  1. Tell us what you need to power.
  2. Set your runtime and solar goals.
  3. Review products matched to your answers.

Planner results are estimates. Confirm product compatibility and installation requirements before purchase.

Recently Viewed Products