High-capacity 24V storage for marine and mobile systems
Pair 3.84kWh of LiFePO4 storage with Victron CAN communication.
The SOK SK24V150PH is a 25.6V 150Ah battery in a rugged IP67-rated PC+ABS enclosure. Built-in self-heating, Bluetooth 5.1, Victron CAN communication and a 200A continuous-discharge BMS make it a serious option for properly designed 24V marine, RV and off-grid systems.
At a glance
SOK SK24V150PH 24V 150Ah Victron CAN Marine LiFePO4 Battery key specifications
3.84kWhNominal stored energy
25.6V / 150AhBattery rating
200AContinuous discharge
IP67Dust and water protection
Built for a configured Victron ecosystem—not every CAN device
Confirm the Cerbo GX connection, CAN cable pinout, firmware, battery settings and supported device count before installation. CAN capability does not make the battery universally compatible.
Why choose this SOK battery
A rugged 24V battery with monitoring and cold-weather support built in.
Victron CAN integrationThe battery supports CAN communication with a compatible Victron Cerbo GX system when connected and configured according to SOK documentation.
Marine-oriented enclosureAn IP67-rated PC+ABS case helps protect the battery from dust and temporary water exposure; installation must still follow SOK's location and mounting guidance.
High-current capabilityA 200A continuous-discharge rating supports substantial 24V loads when cabling, fusing, terminals and inverter surge requirements are correctly engineered.
System fit
Design around the battery's 24V voltage, 200A BMS and communication requirements.
SOK lists a recommended charge voltage below 27.6V, up to 200A charge current and up to 200A continuous discharge. Charger and inverter settings must be configured for LiFePO4 and the exact battery manual.
Victron systemsConfirm Cerbo GX compatibility, the specified CAN interface and cable, firmware and commissioning steps.
Series and parallelSOK lists up to two batteries in series or ten in parallel; use matched batteries at equal state of charge and follow the manufacturer's connection sequence.
Marine installationConfirm ABYC requirements, overcurrent protection, cable sizing, terminal torque, restraint and enclosure placement with a qualified installer.
In the box
What is included
- One SOK SK24V150PH 25.6V 150Ah battery
Charger, inverter, Cerbo GX, CAN cables, NMEA 2000 hardware, fuses, disconnects and installation cabling are not represented as included.
Warranty & support
Manufacturer coverage with Torven Power fit guidance
SOK lists a 7-year limited warranty for the SK24V150PH. Coverage is subject to SOK's current written terms, exclusions and RMA process; warranty shipping costs are not covered by SOK. Torven Power can help verify voltage, charging, inverter and installation fit before purchase.
Common questions
SOK SK24V150PH 24V 150Ah Victron CAN Marine LiFePO4 Battery FAQ
Does it communicate with Victron equipment?
Yes, SOK lists CAN communication with compatible Victron systems, including integration through Cerbo GX. Confirm the exact cable, pinout, firmware and configuration before ordering.
Can it be connected in series or parallel?
SOK lists a maximum of two in series or ten in parallel. All batteries should be matched and brought to the same state of charge before connection, following the manual.
Is it waterproof?
SOK rates the enclosure IP67. That is not permission for unrestricted submersion; install and maintain it within SOK's environmental and mounting instructions.
What size inverter can it support?
Inverter fit depends on continuous and surge current, cable length, voltage drop and BMS limits. Calculate the full DC demand and confirm the design with the inverter and battery documentation.