4 AWG battery cable pair • 80 cm
Route the connection cleanly with the right cable family and length.
The RUiXU S80 is a red-and-black 4 AWG cable pair sized at 80 cm (31.5 in). It gives a supported RX-LFP48100 or RX-LFP48100-H battery connections layout a purpose-matched connection without making the installer adapt an unknown cable at the last minute.
At a glance
The numbers that shape the system decision
80 cmCable length
4 AWGConductor size
1 pairPositive and negative
5/16 in lug + battery plugEnd configuration
Connector family matters more than the color
This listing is for the S80. Match both ends, cable gauge and routing length to the exact battery and busbar shown in your design; similarly named RUiXU cable families are not automatically interchangeable.
A cleaner battery-bank build
Purpose-matched ends reduce field improvisation.
Correct reach80 cm gives the installer a known routing length to plan around without relying on an undersized extension.
Matched connector geometryA 5/16-inch lug and pluggable battery-pole connector match the supported RX-LFP48100-series connection architecture.
Paired polarityThe red-and-black pair keeps positive and negative routing visually organized inside a professionally designed DC system.
System fit
Confirm the model, current and route before connecting.
A cable that physically plugs in is not automatically right for the load. The system designer must confirm the connector family, conductor size, length, bend radius, voltage drop, overcurrent protection and permitted current for the complete battery bank.
Designed aroundRX-LFP48100 or RX-LFP48100-H battery connections
Do not substitute blindlyDo not replace 4 AWG with another gauge or mix OP, PP and S connector families without written confirmation for the exact equipment.
In the box
What this listing includes
- One red-and-black S80 cable pair
- One positive lead and one negative lead
Installation materials, protection devices and other balance-of-system components are separate unless explicitly listed above.
Product confidence
Model-specific connection confidence
The RUiXU S80 is a model-specific system component, so correct fit is part of the purchase decision. Confirm the exact battery or inverter, connector family, electrical rating and installation plan before ordering; manufacturer support and any warranty coverage follow RUiXU’s current written terms.
Common questions
RUiXU S80 FAQ
What is the difference between S80 and the other RUiXU cable listings?
S80 is defined by its 80 cm length, 4 AWG conductor size and 5/16 in lug + battery plug end configuration. Compare all three before ordering.
Can I use this cable simply because the connectors fit?
No. A qualified system designer must also confirm current capacity, voltage drop, cable routing, overcurrent protection and the equipment manufacturer’s connection requirements.
Is 80 cm the overall listed length?
Yes. RUiXU identifies this size as 80 cm (31.5 in). Plan routing without pulling the cable tight or forcing a bend at either terminal.
Can I connect batteries in series with this cable?
Do not assume series operation is permitted. Follow the battery manufacturer’s approved architecture and manual for the exact battery model.