Compact power without the constant generator noise
960Wh of grab-and-go backup at just 23.9 pounds.
The PECRON F1000LFP is built for customers who want meaningful AC output without moving a full-size backup system. Its 1,500W pure sine-wave inverter, fast wall charging, 600W solar input and LiFePO4 battery make it a strong fit for camping, mobile work, home-office continuity and targeted outage essentials.
At a glance
Portable enough to move, powerful enough to earn the trip
1,500WContinuous AC output
960WhLiFePO4 capacity
3,000WSurge output
23.9 lbStation weight
This page is for the 960Wh U.S. model
Some older PECRON imagery and URLs reference a 1,004Wh version. The product offered here is the current 960Wh, 1,500W F1000LFP. Use the specifications on this page and the supplied manual for this model.
Get back to full faster
Fast from the wall, solar-ready away from it.
Up to 1,000W AC inputPECRON rates the F1000LFP from 0–80% in about 50 minutes and a full charge in about 1.1 hours under its test conditions.
Up to 600W solar inputThe XT60 input accepts 11–60V open circuit at up to 14A. Confirm the complete array remains inside every input limit.
Car charging supportedUse the compatible 12V charging connection while traveling; charging speed depends on the vehicle circuit and operating conditions.
The right size for targeted power
Bring one station instead of extension cords and fuel cans
Campsite and tailgatePower compatible coolers, lights, device chargers and cooking equipment without idling a vehicle or running a small generator for every load.
Home office continuityKeep a router, laptop, monitor and selected electronics available during a short outage while staying within the 1,500W limit.
Mobile workCharge tool batteries, camera gear, drones and electronics where grid power is inconvenient.
Check the nameplate wattage and startup surge of every appliance before use. Runtime depends on actual load, inverter losses, temperature, battery age and operating conditions.
Ports and control
Ten outputs for the gear people actually carry
Four 120V AC outletsPure sine-wave power for compatible appliances and electronics, with 1,500W total continuous output.
100W and 33W USB-CDirectly charge supported laptops, tablets and phones alongside two 18W USB-A ports.
12V vehicle and DC outputsUse the 12V/10A car socket and 12V/5A DC5525 output for compatible equipment.
Bluetooth app control and adjustable charging
Use the PECRON app over Bluetooth to view status and manage supported settings, including charging behavior. PECRON also rates the station at about 25 dB while charging or running loads below 500W; fan speed and sound can increase with load and temperature.
In the box
The F1000LFP essentials
- PECRON F1000LFP 960Wh power station
- AC charging cable
- MC4-to-XT60 solar charging cable
- User manual
Solar panels, specialty adapters and PECRON’s optional 500W vehicle charger are not included with this power-station-only SKU unless the cart selection explicitly says otherwise.
Designed for repeat use
LiFePO4 storage rated for 3,500+ cycles
PECRON rates the F1000LFP battery to retain at least 80% of its original capacity after more than 3,500 cycles. The manufacturer lists a 2+3-year warranty; registration requirements, exclusions and remedies are governed by PECRON’s current written warranty terms.
Common questions
F1000LFP FAQ
Can it run a refrigerator?
It can run many compatible refrigerators, but you must verify both running wattage and compressor startup surge. Actual runtime depends on the refrigerator’s duty cycle, ambient temperature and other connected loads.
Does it support UPS backup?
Yes, PECRON lists UPS functionality up to 1,500W. Device sensitivity varies, so test non-critical equipment before relying on the setup and do not substitute it for a certified medical or life-safety UPS.
Can I connect any solar panel?
No. The complete array must remain within the XT60 input’s 11–60V open-circuit range, 14A current limit and 600W maximum, with correct polarity and compatible connectors.
Is the F1000LFP weatherproof?
PECRON does not list this power station as waterproof. Keep it dry, ventilated and protected from rain, standing water, direct heat and blocked air vents.