Expandable 120V power without the oversized footprint
Start with 1,536Wh. Add runtime when your plan grows.
The PECRON E1500LFP V3 combines a 2,200W pure sine-wave inverter, LiFePO4 battery and built-in AC charger in a 38.4 lb station. It is a strong fit for outage essentials, RV use, mobile work and campsite power when a compact station needs more output—and a clear expansion path.
At a glance
The useful numbers, before the feature list
2,200WContinuous AC output
1,536WhBuilt-in capacity
4,400WPeak output, 10 ms
38.4 lbPower-station weight
Check running watts and startup demand
Motors, compressors, pumps and heating appliances can draw more at startup than their normal operating wattage suggests. Keep the combined continuous load within 2,200W and verify that startup demand fits the station’s limits. This is a 100–120V station, not a 240V source.
Build the battery around your runtime
Three capacity levels, one station
1,536Wh base systemStart with the station alone when portability matters and your loads fit the built-in battery.
5,376Wh with one EP3800Add one compatible 3,840Wh expansion battery for longer outage or off-grid coverage.
9,216Wh with two EP3800sUse PECRON’s supported two-battery configuration when your runtime plan needs the maximum listed capacity.
This Torven listing is for the E1500LFP station only. Expansion batteries, solar panels and connection accessories are sold separately unless the selected offer explicitly says they are included.
Recharge with fewer bottlenecks
Fast from the wall, solar-ready in the field
Up to 1,400W AC chargingPECRON rates a full AC recharge at about 1.8 hours under its test conditions. The charger is integrated, so there is no separate charging brick.
Up to 1,000W solar inputThe XT60 input accepts an 11–60V array at up to 20A. Check the array’s open-circuit voltage, current, polarity and connector before connection.
Vehicle charging optionPECRON lists 12–18V vehicle input up to 100W. Charge only while the vehicle setup and included cable instructions permit.
One hub for the devices you actually use
AC, USB, 12V and wireless charging in one place
120V plug-in loadsPower compatible household electronics, small appliances and selected tools within the inverter limits.
100W USB-C and USB-ACharge laptops, phones, cameras and other USB devices without occupying an AC outlet.
12V/30A XT60 outputRun properly matched 12V equipment through the dedicated high-current output with appropriate wiring and protection.
App control and UPS modeMonitor the station through the PECRON app and use the supported UPS function for compatible, non-critical equipment.
Long-service battery platform
LiFePO4 chemistry rated for 3,500+ cycles
PECRON rates the E1500LFP to retain at least 80% of original capacity after more than 3,500 cycles. The manufacturer lists a 2+3-year warranty; registration requirements, exclusions and remedies follow PECRON’s current written warranty terms.
Common questions
E1500LFP FAQ
Is this listing a complete solar-generator kit?
No. This Torven listing has one station-only variant. Solar panels and expansion batteries are separate purchases unless a future offer explicitly lists them in the selected bundle.
How do I estimate runtime?
Divide usable battery watt-hours by the average load in watts for a planning estimate. Actual runtime is lower than the nameplate calculation because of inverter losses, standby draw, temperature and load cycling.
Can it run a 240V appliance or connect directly to a home panel?
No. The E1500LFP provides 100–120V output for compatible plug-in loads. Never backfeed household wiring. Any transfer equipment must be correctly rated and installed by a qualified professional.
Will any solar panel work?
No. The complete array must stay within the station’s 11–60V, 20A and 1,000W input limits with correct polarity and a compatible XT60 connection. Never exceed the input’s open-circuit-voltage limit.