• RICH SOLAR red and black charge-controller-to-battery cables with ring terminals
  • RICH SOLAR 8AWG controller-to-battery cable feature graphic with tinned copper and ring terminals

RICH SOLAR

RICH SOLAR Extension Cable to Connect Charge Controller to Battery Pair of Red and Black Extension Wires to Connect Charge Controller to Battery Cable

RICH SOLAR Extension Cable to Connect Charge Controller to Battery Pair of Red and Black Extension Wires to Connect Charge Controller to Battery Cable

SKU: RS-810

$35.99
$35.99
View Cart

In stock — available to order

Need help before ordering? Call 888-495-5870 Contact our support team

A finished 8AWG link from controller terminals to a battery

Connect a charge controller to a battery with a 10-foot red-and-black 8AWG pair.

The current Torven option for this RICH SOLAR cable set is a 10-foot 8AWG red-and-black pair. Each conductor has a battery ring terminal at one end and a bare wire end for a compatible charge-controller terminal, creating a clear transition between the two devices.

RICH SOLAR 8AWG red and black controller-to-battery cable pair

At a glance

The exact option on this page

8AWGWire gauge
10 ft eachCable length
Ring terminalBattery end
Bare conductorController end
Confirm both ring size and controller terminal capacity

A correct wire gauge does not guarantee either end fits. Check the battery-terminal stud, controller's allowed conductor size, stripping or ferrule instructions, torque, current and voltage drop before installation.

RICH SOLAR 8AWG cable ring terminal and bare controller ends

Why it stands out

A purpose-built controller-to-battery transition

Red and black pairColor coding makes positive and negative routing easier to trace.
Battery rings installedFactory-fitted rings remove one field termination step at the battery end.
Bare controller endsPrepare the conductor ends to the controller maker's exact strip, ferrule and torque instructions.

System fit

Size the charge circuit from maximum controller output.

Confirm the controller's maximum charging current, 10-foot one-way route, round-trip voltage drop, terminal dimensions, battery stud size, conductor support and required protection close to the battery source.

Strong use casesCharge controllers and batteries whose terminals, current and cable-run requirements fit the 8AWG 10-foot pair.
Installer checksBattery chemistry, controller output, conductor ampacity, fuse or breaker, ring stud size, strip length, polarity, terminal torque and abrasion protection.

In the box

What this cable listing covers

  • 1 × 10-foot red 8AWG controller-to-battery cable
  • 1 × 10-foot black 8AWG controller-to-battery cable

Charge controller, battery, fuse or breaker, disconnect, ferrules, terminal boots, cable supports and installation labor are not listed as included.

Product confidence

Protect the battery-side circuit correctly

Battery cables can remain energized even when the controller is off. Install the required battery-side protection and follow the current battery and controller connection sequence.

Common questions

Controller-to-battery cable questions

Is this the 8AWG or 10AWG version?

The current option on this Torven page is the 8AWG, 10-foot red-and-black set.

What size are the battery rings?

The current source does not state the ring-hole diameter. Compare the exact cable end to the battery stud requirement before installation.

Should the battery circuit have a fuse or breaker?

Usually yes. Select and locate protection from conductor ampacity, controller guidance, available fault current and applicable requirements.

Can I cut the cables shorter?

Only with proper tools and an approved new termination. Reworking a finished cable should be done by someone qualified to size, crimp, insulate and test the connection.

RICH SOLAR Extension Cable to Connect Charge Controller to Battery Pair of Red and Black Extension Wires to Connect Charge Controller to Battery Cable RICH SOLAR RICH SOLAR Extension Cable to Connect Charge Controller to Battery Pair of Red and Black Extension Wires to Connect Charge Controller to Battery Cable

Torven Power Planner

Not sure this product fits your setup?

Build a personalized power plan before you order. We’ll estimate the capacity, output, voltage, runtime, and solar input your setup needs—then connect you with real products from our catalog.

  1. Tell us what you need to power.
  2. Set your runtime and solar goals.
  3. Review products matched to your answers.
BUILD MY POWER PLAN  → ASK A POWER SPECIALIST

Planner results are estimates. Confirm product compatibility and installation requirements before purchase.

Recently Viewed Products