Epoch GC2 battery accessory
Check charge status from a dedicated cart-mounted display.
The Epoch battery meter fuel gauge is made for compatible Epoch 48V GC2 golf-cart battery systems. It gives the driver a convenient way to monitor battery charge without relying on a phone at every stop.
48V GC2System family
battery-meter-gc2Epoch SKU
Dash viewCharge monitoring
Fit and system compatibility
Match the GC2 system and display connection before ordering.
Use this gauge only with an Epoch 48V GC2 system whose current wiring diagram specifies this battery meter and connector. Match the battery model, number of modules, communication layout and mounting location.
- Confirm the gauge connector and cable route against the installed Epoch GC2 kit.
- Choose a visible dash location with adequate rear clearance and protection from impact and water.
- Do not substitute based only on a similar-looking plug; communication pinout and system configuration must match.
What's included
This listing covers the Epoch GC2 battery meter fuel gauge identified by SKU battery-meter-gc2. Confirm the current listing and installation guide for the exact cable and mounting hardware supplied with the gauge.
Warranty and safety documentation
Epoch accessory warranty terms apply.
Epoch publishes a one-year limited warranty for qualifying accessory defects, subject to its current terms. Power down the cart, follow the exact GC2 wiring diagram and secure the display and cable away from moving parts, sharp edges and pinch points.
Common questions
Will this work with any 48V lithium battery?
It is intended for compatible Epoch 48V GC2 systems. Battery voltage alone does not confirm connector, communication or display compatibility.
Does the gauge replace the Epoch mobile app?
It provides a convenient dedicated charge display in the cart. App functions and available battery data depend on the installed GC2 system and current Epoch documentation.
Can I connect it to a single GC2 module?
Follow the diagram for your exact Epoch GC2 kit. The required battery count, communication cable and connection point depend on that system configuration.
What should I verify before installation?
Verify battery model, system voltage, connector, cable reach, display cutout or mounting method and the current Epoch wiring instructions.
Want a GC2 fitment check?
Send Torven Power your battery model, cart model and model year, plus a photo of the present dash and battery connections.
Ask a product question