20.48kWh of modular home energy storage.
This 4-module ETHOS package combines lithium iron phosphate batteries with an ETHOS control box for a compatible 48V-class inverter system. Nominal battery voltage is 51.2V. The inverter and solar panels are sold separately.
Size storage around your essential loads
Use 20.48kWh of nominal DC capacity as part of an installer-designed backup or solar-storage system. Actual AC energy and runtime depend on usable depth of discharge, inverter efficiency, operating conditions and the loads you connect. A compatible inverter is required to power AC appliances.
What this package includes
Four 5.12kWh ETHOS battery modules, one ETHOS control box, one additional ETHOS rack base, one 4.9ft stack-to-stack power cable pair and one 4.9ft stack-to-stack communication cable. The control box includes its own base; module interconnects follow the manufacturer packing and installation documentation.
This is the battery-system package only. Inverter, solar panels, site wiring, grounding conductors, external protection and installation are separate unless expressly identified in the supplied packing list. Check the current manual for interconnections, placement and clearances before installation.
Communication and installation
ETHOS supports CANBus and RS485 communication. Confirm the specific inverter model, communication protocol and firmware before ordering. The manufacturer rates these configurations at up to 250A continuous DC discharge and 200A maximum charging; inverter and system limits may be lower. Installation, permits and any required system certification must be evaluated for the complete equipment combination.
Choosing your configuration
This listing is specifically for K0951: 4 modules and 20.48kWh. For expansion, use compatible ETHOS components and the manufacturer-approved wiring layout. Do not mix battery models or assume another kit includes the same cables.
ETHOS manufacturer specifications · Installation manual and wiring diagrams · Compare battery banks · Size your backup system · Confirm inverter compatibility